What is the Toshiba boot menu and how to enter it without problems? Because the Toshiba Satellite boot menu entry is different in different situations, things get complicated. With this publication ofmini hermitage, you don't have to worry because you can get all the details from here.
What is the Toshiba boot menu?
When you turn on your computer for the first time, a Welcome screen appears. tells you that you canEnter BIOS setupby pressing F2, F12 or other keys or hotkeys. However, it only appears for a few seconds.
You need to press different keys on different brands of computers. For example, you need to press F2 on Asus computers, F2 or F12 on Dell computers, and F10 on HP laptops. Similarly, the start menu varies across different brands of computers. You can see for exampleLenovo Startup Menu, HP Start Menu,Dell boot menu, the Toshiba boot menu discussed in this post, and other boot menus.
What is the Toshiba Satellite boot menu? As the name suggests, it refers to the start menu that appears on the Toshiba Satellite laptop. What does the Toshiba Satellite Start menu do in Windows 10? Find answers here.
As you know, when you turn on your computer, it boots the operating system installed on the hard drive. However, if your computer gets stuck on a blue screenError 0xc0000221or black screen giving no boot error, you need to clean your Toshiba Satellite laptop from devices such as system installation CD, USB flash drive,disco U, or other articles.
You have toChange boot orderfrom your computer after entering the boot menu in BIOS setup. To do this, go to the next section.
How to access the Toshiba Satellite start menu
There are 2 cases to enter the Toshiba Satellite boot menu. The first is that your Toshiba laptop can boot normally while the other is that the laptop can't boot properly. How do I access the Toshiba Satellite boot menu in these 2 situations?
To get the details, read the following content of this post now!
Case 1: Enter Toshiba boot menu when PC can be booted
You can easily access Toshiba laptop boot menu when your computer boots up smoothly. However, things will be different if you are blocked by Windows and cannot enter the system. At this point, you need the help of a Windows password key.
With Windows Password Key, you can remove the missing password and start the PC smoothly. After that, you can use the following steps to enter the Toshiba boot menu.
Paso 1:Turn off your Toshiba laptop.
Paso 2:Restart the PC and then press the keys requested on the screen until you reach the Toshiba boot menu. The key you press is also called the Toshiba boot menu key.
Paso 3:You can also enter BIOS setup to find the Toshiba Satellite boot menu. To do this, you can repeat the above steps to get thePhoenixBIOS Setup Utilitywindow and then change toStiefeltab by pressing the corresponding buttons.
Above:You can use the buttons displayed at the bottom of the window to access the Boot tab.
The best recommendation:Can I run Rainbow Six Siege? get answers here
Case 2: Enter Toshiba Satellite boot menu when PC fails to boot
How do I access the Toshiba Satellite boot menu if my computer can't start? Due to the fact that your computer cannot boot normally, you need to prepare abootable usbfor your Toshiba satellite.
Now follow these steps to enter the Windows 10 Toshiba Satellite start menu.
Paso 1:Connect the bootable USB flash drive to your computer and then press the buttonperformanceon your Toshiba Satellite notebook until the computer boots.
Paso 2:Press and hold the Toshiba Satellite boot menu button (the button that appears after turning on the computer) until the BIOS setup window appears.
Paso 3:At this point, navigate toStiefelTab with arrow keys. Then press the buttonup or downarrow keys and+/-Buttons to change the boot order.
Stage 4:then pressF10to save the changes and press the buttonInputbutton to execute the operation.
What can you do if you cannot access the Toshiba boot menu?
What can you do if your Toshiba computer does not enter BIOS or enter Toshiba boot menu? If your laptop cannot access the BIOS, this article will provide you with the answers:What if your computer can't access the BIOS? A guide for you!
Regarding Toshiba boot menu input errors, please pay attention to this section. In fact, the phenomenon that the Toshiba Satellite start menu cannot be accessed is quite common. You can see that many users are complaining about this issue if you search Windows related forums.
Here is a real example from tenforums.com.
I'm having a problem with not being able to boot my Toshiba laptop from a repair DVD or USB recovery drive. I recently built both from the laptop and am trying to test them. I can't get the laptop to boot into the BIOS menu. Any help greatly appreciated.--tenforums.com
How to properly start your Toshiba Satellite laptop when the PC does not enter the start menu or boot as usual? There are 2 methods available to you. The first method is to boot your Toshiba Satellite laptop via the MiniTool bootable media. The second is to boot the laptop using a USB recovery drive.
Method 1: Boot Toshiba Satellite laptop with the help of MiniTool Bootable Media
Since your Toshiba Satellite laptop is unable to enter boot menu or boot as usual, you have to boot the PC with the help of external tools like MiniTool boot media. This media can be created with MiniTool Partition Wizard Pro or more advanced editions (such as Pro Ultimate).
Above:MiniTool Partition Wizard Free Edition does not support the bootable media creation function. For more information, seeedition comparison.
Download and install MiniTool Partition Wizard on a normally working PC by clicking the buttons below and then connecting a removable device such as a USB flash drive.card tfand U disk to PC.
buy nowbuy now
Paso 1:Launch MiniTool Partition Wizard to get its main interface.
Paso 2:Clickbootable mediamove on.
Paso 3:Navigate to the next window by following the instructions on the screen, then selectMemoria flash USB. Then a warning window will appear, informing you that the data on the USB disk will be destroyed during the process. Afterdata backup, clickYkeep going.
Stage 4:After creating the bootable media, click theFinbutton to finish the process.
Paso 5:Disconnect the USB and connect it to the broken Toshiba Satellite laptop. Now force reboot to enter BIOS setup. In this window, you can set the created boot media as the top boot device and confirm and save the changes.
Paso 6:Then you will get the following window. All you have to do is clickOKto continue until you navigate to the main interface of MiniTool Partition Wizard.
Paso 7:After starting MiniTool Partition Wizard, you can use functions likeCheck file system, surface test, rebuild MBR,Activateand others to fix errors on your PC. Then your computer can boot without any problem.
The best recommendation:[Repair Guide] Windows 10 Computer Activation Error Code 0xc004f025
Method 2: Boot Toshiba Satellite laptop using the help of USB recovery drive
Another tool to boot up your Toshiba laptop is the USB recovery drive created with the Windows built-in tool. This recovery drive includes some troubleshooting tools to help you fix certain PC errors.
More importantly, some important system reinstallation files can be copied from this drive, which will greatly benefit you when reinstalling Windows. The fault is that your operating system returns to the factory state. Indicates that you will lose data and some changes you made will be discarded.
Despite this, USB recovery drive is still accepted by Windows users as the advantages outweigh the disadvantages. To create one you can follow these steps.
Paso 1:Similarly, connect a USB stick to a working computer and then open theSwitchboard. then clickrecreationin the next window.
Paso 2:In the next window, click on theCreate a recovery drivelist optionAdvanced recovery tools.
Paso 3:check theBack up system files to the recovery drivecheck the box and then clickNextGusto.
Stage 4:Select the drive letter of the connectedUSB memoryand clickNext. USB flash drive capacity requirements vary by computer model. To be precise, some Toshiba laptops require the USB flash drive to have a minimum capacity of 8 GB, while others require a minimum of 16 GB.
Above:After that, a warning window will appear, reminding you that all data on the disk will be erased. If you are sure that there is no important data on the device, click the Create button to continue.
Paso 5:The recovery drive will be created automatically. You have to wait for some time as it can take a long time. When the creation process is complete, clickFin.
Paso 6:Now disconnect the USB drive and connect it to the unbootable Toshiba computer.
Paso 7:Reboot the computer repeatedly until it boots. Once booted, press and hold the Toshiba Satellite Boot Menu button to enter BIOS setup.
Paso 8:switch toStiefeland then set the USB recovery drive as the first boot device. Then choose a language or country on the popup keyboard layout screen and pressInput.
Paso 9:In the next window, click onRecover from a driveand then choosejust remove my filesPossibility. After that, follow the instructions on the screen to complete the entire process.
bottom line
Read here, you can know what is Toshiba start menu and how to access it. If your Toshiba Satellite laptop won't start up as usual, you can use helper tools like MiniTool Bootable Media and USB recovery drive to boot up and troubleshoot your PC.
If you have any new thoughts on this topic, you can leave your words in the comment section below. You can send us an email with your questions about MiniTool software[Email protected].
Toshiba Boot Menu FAQ
How do I access the boot menu on a Toshiba Satellite?
The methods to enter the Toshiba Satellite boot menu vary in different cases. If your computer can start normally, you can access the Toshiba Satellite boot menu by pressing and holding the screen key after turning on the computer. If the PC is not bootable, you need to get a bootable USB and then start the process.
What can I do if a Toshiba computer cannot boot correctly?
If the Toshiba computer cannot boot normally, you need a bootable USB stick, e.g. B. MiniTool bootable media or USB recovery drive. Then start the PC with their help and set them as the first boot device in BIOS. These tools allow you to boot up and fix computer errors.
How to boot a Toshiba laptop from USB?
To do this, you need to connect the USB port to your Toshiba Satellite Computer and restart your computer. After entering BIOS setup, set the USB device as the top boot device using the and arrows.+/-Key.
How to make a Toshiba laptop boot from a CD?
Similarly, you need to insert the bootable CD into the Toshiba Satellite laptop. Then start your computer and navigate to BIOS setup to set CD as the first boot order. Now the Toshiba laptop can boot from the CD.
FAQs
How do I get to the boot menu on a Toshiba Satellite? ›
While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
How do I get into the BIOS on a Toshiba Satellite Windows 10? ›Step 1: Shutdown the laptop. Step 2: Drain all its power by removing the battery and pressing the power button. Step 3: Put the battery back, switch on the laptop, and press F2. And Voila!
What is my boot menu key? ›The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.
How do I enable the F12 boot menu? ›Turn on the computer and tap the F12 key several times, until you see One Time Boot menu. Use the arrow keys and select BIOS Flash Update (Figure 1). Figure 1: Selecting the BIOS Flash option on the F12 One Time Boot menu.
What is F8 key on Toshiba laptop? ›| Key | Outline |
|---|---|
| F8 | Fast forward |
| F9 | Decreases speaker volume |
| F10 | Increases speaker volume |
| F11 | Mutes the sound coming from the computer |
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL.
How do I force my computer to boot into BIOS? ›To boot to UEFI or BIOS:
Boot the PC, and press the manufacturer's key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12.
- Click "Start | All Programs | TOSHIBA | Utilities | HWSetup" to open the laptop's original equipment manufacturer, or OEM, system configuration software.
- Click "General," then "Default" to reset the BIOS settings to their original state.
- Click "Apply," then "OK."
When a computer is starting up, the user can access the Boot Menu by pressing one of several keyboard keys. Common keys for accessing the Boot Menu are Esc, F2, F10, or F12, depending on the computer or motherboard manufacturer. The key to press is usually specified on the computer's startup screen.
What is F11 boot menu? ›When this option is enabled, you can boot directly into the One-Time Boot Menu in the System Utilities by pressing F11 in the POST screen after a server reboot. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > One-Time Boot Menu (F11 Prompt).
How do I get to the boot menu without F12? ›
If your PC is not listed it could be one of the following keys : ESC, F10, F12, or F2. Additionally if your PC does not support a separate boot menu you can use the “ Del” key to access the system bios and change the boot priority manually.
Is BIOS F10 or F12? ›| Manufacturer | Type | BIOS Key |
|---|---|---|
| DELL | laptop | F12 |
| EMACHINES | Tab, Del | |
| HP | generic | Esc, F10, F1 |
| HP | desktop | F10 |
On many PCs, as the computer is booting, you see an option to press F10 to enter setup. Pressing F10 when this message is displayed enters the BIOS or CMOS setup. How to enter and exit the BIOS or CMOS setup.
What does F5 do on boot? ›The F5 hotkey was introduced in Windows 95, where the boot sequence hotkeys were as follows: ESC – Boot in text mode. F5 – Boot in Safe Mode. Shift + F5 – Boot to Safe Mode MS-DOS.
What does F11 and F12 do? ›F12: Prints the file in the active window. F3: Cancels the previous undo action. F7: Replies to the e-mail in the active window. F11: Saves the file in the active window.
What happens if you press F12? ›Detailed Solution. F12 is the short cut key that is used to open save as file window in Microsoft office.. IBPS RRB PO Provisional Select List 2022 Out!
What is F11 key used for? ›The F11 key allows you to activate full-screen mode in your browser. By pressing it again, you will return to the standard view with the menu bar. In Microsoft Excel, you can use the Shift key with F11 to quickly create a new spreadsheet in a new tab.
What does F12 do on Toshiba laptop? ›Press "Fn-F12" together to zoom in your screen. Press the buttons again to zoom out.
What does shift F8 do? ›Shift+F8 Add to selection. Shift+F9 Performs calculate function on active sheet. Ctrl+F3 Open Excel Name Manager. Ctrl+F4 Closes current Window.
What does F8 and F9 do? ›The F9 function key retrieves the last command(s) entered on the command line, in the reverse order that they were entered. Now, you can use the F8 function key to retrieve commands in the opposite direction.
How do I force the boot menu to open? ›
Access Advanced Boot Options Windows 10 with Shift + Restart. Another easy way to access Advanced Options window is through Shift + Restart. You can click Start -> Power, press and hold Shift key on the keyboard and click Restart button. This will take you into the Advanced Startup Options menu in Windows 10.
Which key to press to boot from USB? ›- Press the Power button on your computer.
- During the initial startup screen, press ESC, F1, F2, F8, or F10. ...
- When you enter BIOS Setup, the setup utility page will appear.
- Using the arrow keys on your keyboard, select the BOOT tab. ...
- Move USB to be first in the boot sequence.
If F8 isn't working and you've to restart your computer in Safe Mode immediately, try it via the Start menu. Open the Start menu and then Settings> Update & Security> Recovery> Restart Now option. While your computer is in reboot mode, you've to select Troubleshoot under the Select an Option screen.
What to do if boot menu is not working? ›If the boot sequence does not show up, select legacy BIOS mode and try to install Windows. Then select UEFI BIOS mode, and check the boot sequence. Reset the BIOS (press F9 to load defaults, press F10 to save and exit). If the hard disk is not recognized, try cleaning the disk.
What is boot menu F9? ›F9 Boot Device Options
The Boot Device Options, F9, is known for BIOS boot resources for UEFI including Windows Boot Manager, Network Card. And it also includes Legacy Boot Source like DVD, hard drive, CD, and USB flash drive. When you need to switch or change the PC boot order in BIOS, you can use this option.
From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > One-Time Boot Menu (F11 Prompt) and press Enter. Select a setting and press Enter.
How do you bypass a locked BIOS? ›Turn off the computer and disconnect the power cable from the computer. Locate the password reset jumper (PSWD) on the system board. Remove the jumper plug from the password jumper-pins. Power on without the jumper plug to clear the password.
Can you unlock a locked BIOS? ›BIOS passwords cannot be recovered. If you have forgotten one of the passwords that is set in the BIOS, resetting the CMOS or NVRAM helps reset the BIOS to factory default settings and remove the passwords from the BIOS. WARNING: Clearing the CMOS or NVRAM using a jumper resets the passwords in the BIOS.
How do I manually boot from USB? ›Turn on the PC and press the key that opens the boot-device selection menu for the computer, such as the Esc/F10/F12 keys. Select the option that boots the PC from the USB flash drive.
How do I get USB to show in boot menu? ›...
- Restart the system into the BIOS.
- Ensure the Boot Mode is set to EFI (or UEFI). This is found in the Boot Options menu.
- Make sure that the USB Boot Priority is enabled.
- Save the changes and exit.